Radio Theory and design

The tool required is chisel edged NOT knife edged. You could take a hacksaw blade and break it in half. Grind the teeth off and bevel th...

The subject of mounting surface mount compoments comes up every so often. I mounted a couple for a pre-amp. documented the process so ...

The red box contains the Solar Farm. The blue box would be the distribution system. The farm produces 11Kv which goes up the pole and co...

A request was made for a 1.2 volt amp. The idea was to make a radio powered by a single rechargeable cell. My last three post were in respon...

I made a couple of change to the resistors and added gain. 10 microvolt in and 1350 microvolt out. This cost me 3 ma battery draw. ...

I located My model for the P416B transistor and did a simulation. I did the sim at 2 MHz and 10 micro volt input. Here I am probing C2. ...

The power supply is set at 1.2 volts. The two meters are on the input and output. I switched the meters to ass...