Radio Theory and design

The teacher says build the DC bias network first. This is it. In order to have an oscillator I need a resonant circuit. L1, C1 and C2...

You could place a pot in series and adjust Vin to 1/2 Vg then the pot would be equal to Zin. If you use this approach and do not measure b...

This was so simple even I could do it. No math just pick some values to limit the current and set the bias. I'm looking at about 1 ma cu...

Usually when we lace a bundle we just wrap the string around the wires but what if we want the wires to lay flat? I bent a hook in the ...

500KHz to 1500KHz Expanded range to show more roll-off The yellow is the half power points. The red is the MW band.  Increased ra...

Setting the parameters for a stage with a 600 Ohm generator, 10ufd coupling cap, 2.4k Ohm input Z, and 1 nfd input capacitance.  10 Hz ...

The half power point is .707 signal out or when Xc = Rl in a RC coupled circuit. I will show some RC circuits and some transistor amps to ex...