Years ago my friend Andy built the 40/80. It is a good example of the dual conversion as presented in the block diagram. What I have in mind this time is a JFET design rather than the MOSFET. I bought a box of K2539's for $5 and I tend to use them first. I also have some J112 and J175 to try. My design tool of choice is LTspiceIV. Other tools may give good results but LTspice is an old friend. The next contender is QUCS "Quite Unerversal Circuit Simulator". I have used QUCS just enough to see the possibilty. It is available is several packages for Linux, Windows and Mac. Now things to consider: Should I use a DBM or active detector? Single conversion or dual conversion? Thrown together with a minimum of parts. etc.... look at the 40/80 here: ***** https://radio.radiotrician.org/2018/11/dbm-and-dual-gate-mixer.html***** It uses a DBM and dual gate mxer. DBM maybe but no dual gates this time.