DIT produced a winner with the Cap Divider. I put it on a breadboard and the results were impressive.
 |
| The datasheet offered this circuit. I used 1.5k cathode resistor and 100k for the rest and .5ufd caps throughout. |
|
 |
| I put a meter on the input and output. The signal generator on the input. |
|
 |
| I adjusted the input to 10mv. |
|
 |
| Apply power and have 10 volts output. Looks like a winner. |
|
I used a PI filter in the DC supply I will draw it and post next time if my internet does not crash. My server is not doing well this week I keep timing out.
No comments:
Post a Comment